Calibration · Repair · Maintenance
Spirometer
Calibration, repair and preventive maintenance for Spirometer, carried out on-site at your hospital or lab, anywhere in India.
- NABL-accredited lab · ISO/IEC 17025
- On-site visits across India
Spirometer: overview
A spirometer measures how much air a patient can breathe out, and how fast. Doctors use the readings (FVC, FEV1, PEF) to diagnose and follow asthma, COPD and other lung conditions, and to check lung function before surgery. Each result is compared with a predicted normal value, so a small error in volume or flow can move a patient from “normal” to “abnormal”.
Shiwi Enterprises calibrates, services and repairs desktop, handheld and PC-based spirometers used in hospitals, chest clinics, pulmonary function labs and occupational health centres. Our engineers come to your site anywhere in India, so the unit stays in your department.
Photo: COSMED, CC BY-SA 3.0, via Wikimedia Commons.
What we check
Parameters covered for Spirometer
Performance
Electrical safety
Services
Services for Spirometer
Calibration for Spirometer
Spirometer calibration checks that the device reads volume and flow correctly against a known reference. We use a calibrated 3-litre syringe, test at several flow rates, and check the electrical safety of mains-powered units.
What we check
- Volume accuracy with a 3 L calibration syringe (ATS/ERS guidance allows ±3%)
- Flow linearity: syringe strokes at low, medium and high flow
- Leak and zero check on volume-displacement spirometers
- Electrical safety: protective earth, insulation resistance, leakage current
You receive a calibration certificate with the measured readings for each unit.
Plan a full calibration at least once a year, and again after the spirometer is dropped, repaired or moved. The daily syringe check stays with your department, as ATS/ERS guidance recommends.
Service & maintenance for Spirometer
Most spirometer faults are small but stop testing: a cracked or blocked flow sensor, a turbine that sticks, a worn cable, a weak battery or a printer that no longer feeds paper. We inspect the unit, clean or replace parts where possible, and recalibrate after every repair so the readings can be trusted again.
- Preventive maintenance visits
- Flow sensor and turbine inspection and cleaning
- Display, keypad, printer, battery and cable faults
- Recalibration after repair
Send us the make, model and number of units, and we will reply with a quote and a visit date.
How it works
How on-site calibration works
- 01
Send your equipment list
Share it through the form, by email or on WhatsApp. We confirm the scope and send a quote.
- 02
Fix a date
We agree a visit date with your team and plan the work around patient care.
- 03
Calibration and testing
Our engineers test each device against reference analysers and record the results.
- 04
Certificates for your records
You receive a calibration certificate for each instrument, ready for NABH and internal audits.
Get a quote for Spirometer
Tell us the make, model, quantity and city. We reply with a quote and a visit plan.



