Calibration · Repair · Maintenance
Anesthesia Machine
Calibration, repair and preventive maintenance for Anesthesia Machine, carried out on-site at your hospital or lab, anywhere in India.
- NABL-accredited lab · ISO/IEC 17025
- On-site visits across India
Anesthesia Machine: overview
An anesthesia machine mixes oxygen, air, nitrous oxide and anaesthetic vapour and, in most models, ventilates the patient during surgery. The anaesthetist relies on the flowmeters, the vaporiser, the ventilator and the oxygen monitor to read true. A leak or a drifting oxygen reading in theatre is a patient safety risk.
Shiwi Enterprises calibrates, services and repairs anesthesia workstations in operation theatres, day-care units and labour rooms. Our engineers come to your hospital anywhere in India and test the machine with a calibrated gas-flow analyser.
What we check
Parameters covered for Anesthesia Machine
Performance
Electrical safety
Services
Services for Anesthesia Machine
Calibration for Anesthesia Machine
Anesthesia machine calibration checks the gas delivery, the built-in ventilator and the safety systems against a calibrated gas-flow analyser and test lung.
What we check
- Ventilator tidal volume, PIP, PEEP and respiratory rate
- Oxygen percentage and oxygen monitor reading
- Flowmeter accuracy
- Breathing system leak test
- Oxygen failure alarm and pressure alarms
- Electrical safety: protective earth, insulation resistance, leakage current
You receive a calibration certificate with the measured readings for each unit. Plan a calibration at least once a year and after any repair to the gas or ventilator system.
Service & maintenance for Anesthesia Machine
Typical faults are leaks in the breathing system, sticky flowmeter floats, failed oxygen cells, ventilator bellows problems and alarms that do not sound. We find the fault, replace seals and parts, and run a full leak and performance test before the machine returns to theatre.
- Preventive maintenance and seal kit replacement
- Leak tracing in the breathing system
- Oxygen cell and sensor replacement
- Ventilator and bellows faults
- Recalibration after repair
We service equipment from any brand. Send us the make, model and number of units, and we will reply with a quote and a visit date.
How it works
How on-site calibration works
- 01
Send your equipment list
Share it through the form, by email or on WhatsApp. We confirm the scope and send a quote.
- 02
Fix a date
We agree a visit date with your team and plan the work around patient care.
- 03
Calibration and testing
Our engineers test each device against reference analysers and record the results.
- 04
Certificates for your records
You receive a calibration certificate for each instrument, ready for NABH and internal audits.
Get a quote for Anesthesia Machine
Tell us the make, model, quantity and city. We reply with a quote and a visit plan.



