Calibration · Repair · Maintenance
Diathermy Machine
Calibration, repair and preventive maintenance for Diathermy Machine, carried out on-site at your hospital or lab, anywhere in India.
- NABL-accredited lab · ISO/IEC 17025
- On-site visits across India
Diathermy Machine: overview
A shortwave diathermy machine heats deep tissue with high-frequency electromagnetic energy, usually at 27.12 MHz. Physiotherapists use it to ease pain, relax muscles and improve movement in joints and soft tissue. The dose depends on the output power and treatment time set on the unit, so if the machine delivers more or less than it shows, the patient gets the wrong treatment, or a burn.
Shiwi Enterprises calibrates, services and repairs shortwave diathermy units in hospital physiotherapy departments, rehabilitation centres and private physiotherapy clinics. Our engineers come to your site anywhere in India.
What we check
Parameters covered for Diathermy Machine
Performance
Electrical safety
Services
Services for Diathermy Machine
Calibration for Diathermy Machine
Diathermy calibration checks that the power the unit delivers matches the setting on the panel, that the timer is accurate, and that the machine is electrically safe for the patient and the therapist.
What we check
- Output power at low, medium and high settings, measured into a test load
- Treatment timer accuracy and automatic switch-off
- Tuning to the patient circuit and output stability during treatment
- Electrodes, applicator arms and cables for damage or worn insulation
- Electrical safety: protective earth, insulation resistance, leakage current
You receive a calibration certificate with the measured readings for each unit. Plan a calibration at least once a year, and again after any repair to the output section.
Service & maintenance for Diathermy Machine
Common diathermy problems are an output that drops or will not tune, a timer that does not cut off, cracked electrode cables, loose applicator arms and noisy fans. We find the fault, repair or replace the part where possible, and recalibrate the output before the unit goes back into use.
- Preventive maintenance visits
- Output and tuning faults
- Electrode, cable and applicator arm replacement
- Timer, switch and display faults
- Recalibration after repair
Send us the make, model and number of units, and we will reply with a quote and a visit date.
How it works
How on-site calibration works
- 01
Send your equipment list
Share it through the form, by email or on WhatsApp. We confirm the scope and send a quote.
- 02
Fix a date
We agree a visit date with your team and plan the work around patient care.
- 03
Calibration and testing
Our engineers test each device against reference analysers and record the results.
- 04
Certificates for your records
You receive a calibration certificate for each instrument, ready for NABH and internal audits.
Get a quote for Diathermy Machine
Tell us the make, model, quantity and city. We reply with a quote and a visit plan.



